Filter
Top Products
SpectraLink Corporation Installation and Operation
Link WTS – Link 150 M3 MCU
2. Installation Overview
Installation has three phases. In most cases, a separate person is responsible for each
phase.
1. Site preparation and wire installation: This is usually done by a wire technician or
contractor.
2. Installing the SpectraLink system: This is done by SpectraLink or one of our
certified distributors.
3. Programming the customer’s telephone system to work with the SpectraLink
system: This is usually done by the customer’s system administrator or
technician.
Because these major steps require some parallel activities, it is important to
coordinate the activities among the persons involved.
This table lists the installation steps and the person usually responsible for each step.
PN: 72-0075-01-F.doc Page 7