Filter
Top Products
SpectraLink Corporation Installation and Operation
Link WTS – Link 150 M3 MCU
• If the Link 150 M3 MCU is connected to your telephone system via analog lines,
refer to the
for analog systems.
• If your Link 150 M3 MCU is connected to a digital key telephone system or
PBX, refer to the
document that deals specifically with your brand of telephone
system.
7.5 Test Handsets
Verify proper registration and operation of each handset by performing the
following steps.
1. Press the START key on each handset. The extension number should clear and
you should hear dial tone. On some digital systems, depending on how the
telephone system is programmed, you may have to select a line to get dial tone.
2. Place a call to each handset to verify ring, answer, clear transmit, and clear
receive audio.
3. Verify all programmed features on each handset.
4. Press the
END key. The LINE indicator should turn off.
PN: 72-0075-01-F.doc Page 33