Filter
Top Products
The Integrated Answering Device
70
Remote access with the handset
You can operate your answering system
from another room using a handset. Ô
1. Press SELECT/ Remote
Answering Machine operation
appears on the display. The answering
system announces the current time and
the number of messages stored in the
memory.
2. You hear “For help, press zero”.
If no command is entered and if you
have a message, the answering system
start playing the messages.
The answering system announces the
message number in the beginning of the
message. The time and day that each
message was received is announced
after the message is played.
3. Enter a command within 30 seconds.
You may select a command from the
following chart:
Remote Key Function
/1 Repeat a Message Ô
/2 Playing incoming Messages
/3 Skipping a Message
∅/4 Deleting a Message/Greeting
Message
/5 Stop Operation Ô
6 Answering System On
7 Memo Record/Stop Ô
8 Greeting Message Record/Stop
Ô
9 Answer System Off
0 Help Guidance
Ô NOTES Ô
Remote access with the
handset
• If you press END before
the answering system
answers, the phone will
return to standby.
• When the answering
system does not answer
within 6 seconds, you
hear a beep and the
phone will return to
standby.
• When you receive a call,
the remote operation is
canceled.
• You can change the
handset volume during a
remote operation.
• During the remote
operation
Remote
AnsweringMachine
operation
appears on
the base.
• If you have new
messages and old
messages, only the new
messages will be played.
After you have reviewed
your new messages, you
can play your old
messages by again
pressing X/2.
Remote Key Function
• For Repeat a Message
function, press /1
within about four
seconds to repeat the
previous message, or
press /1 after about
four seconds to repeat
the current message.
• For Memo Record and
Greeting Message
Record function, the first
time you enter the
corresponding
command, it starts the
Recording function. If
you want to stop the
recording, enter the
command again.
43-3880.book Page 70 Monday, June 28, 2004 2:07 PM