Filter
Top Products
The Integrated Answering Device
60
2. Once you have recorded a personal
greeting, press the CHANGE soft key
to choose the greeting. The selected
outgoing message is played. Each time
you press the CHANGE soft key, the
phone switches the outgoing message
between the prerecorded and the
personal outgoing message.
Setting a PIN Code
Security code selects a two-digit Personal
Identification Number (PIN) code. A PIN
code is required to play your messages
from a remote location.
1. Press MENU/DEL (or the MENU soft key
on the base). Select the Answ. Setup
menu, and then the Security Code
submenu.
2. Enter a two-digit PIN code (01-99)
using the number keypad (
0-9) (default
is 80).
3. Press
SELECT/ (or the OK soft key
on the base). You will hear a
confirmation tone.
Setting the Ring Time
Ring Time allows you to set the number of
rings the caller hears before your answering
system plays the outgoing message. You
can set the ring time to answer after two,
four, or six rings. If you enable the Toll
Saver (TS), the answering system picks up
after two rings if you have new messages
and after four rings if there are none.
1. Press
MENU/DEL (or the MENU soft key
on the base). Select the Answ. Setup
menu, and then the Ring Time
submenu.
43-3880.book Page 60 Monday, June 28, 2004 2:07 PM