Filter
Top Products
Using Your Phone
37
2. To hang up, press
SPEAKER or return
the corded handset to the base. The
handset(s) will still be connected to the
call.
From a second handset
1. Press
TALK/FLASH or SPEAKER on the
handset to join the call.
2. To hang up, return the handset to the
cradle or press
END on the handset.
The base or other handset will still be
connected to the call.
FIND HANDSET
To locate the handset, press the PAGE soft
key on the base when the phone is in
standby mode. All registered handsets beep
for 60 seconds, and
Paging appears on
the handset display. To cancel paging,
press any key on the handset or the
CANCEL soft key on the base. Ô
SPEED DIALING
You can program up to ten speed dial
numbers in each handset. You must
program a speed dial number before you
can use the speed dialing feature. When the
phone is in standby mode, press and hold a
number key (
0-9) associated with the speed
dial until the phone number appears, and
then press
TALK/FLASH or SPEAKER (or the
SPEAKER
on the base). The number stored
in the speed dial (SPD1 - SPD0) is dialed.
Ô NOTE Ô
If the battery pack is
completely drained, the
handset will not beep when
paging.
43-3880.book Page 37 Monday, June 28, 2004 2:07 PM