Filter
Top Products
Installation
12
For direct wall
mounting,
align the
base’s
keyhole slots
with the
mounting screws and slide the base
downward to secure it.
6. Plug the adapter into a standard AC
outlet.
7. Lift the base’s antenna to a vertical
position.
8. Press and push up on the handset
holder to lift and remove it. Turn it over
and rotate it 180
°, then slide it down
into its slot and snap it back into place
so it holds the handset.
9. Connect the handset cord to left side of
the phone and corded handset.
USING AC POWER
You can power the cordless handset using
the supplied 9V, 210 mA AC adapter.
CAUTION
You must use
a Class 2
power source
that supplies 9V DC and
delivers at least 210 mA.
Its center tip must be set
to positive and its plug
must fit the charger’s
DC IN 9V jack. The
supplied adapter meets
these specifications.
Using an adapter that
does not meet these
specifications could
damage the handset or
the adapter.
!
43-3880.book Page 12 Monday, June 28, 2004 2:07 PM