Filter
Top Products
The Integrated Answering Device
68
From the handset
1. While on a call, press
MENU/DEL.
2. Press to move the pointer to
Call
Record
, and then SELECT/ .
Recording a Call and R appear in
the display.
To turn stop recorging, repeat above step
again,
Stop Recording appears.
REMOTE OPERATION
You can check, play, or delete messages,
even record a new greeting message from a
remote location (when you are away from
home, or from another room using a
handset). Additionally, you can turn On or
Off your answering system remotely. Ô
Remote access away from home
You can operate your answering system
from a remote location using any
touch-tone telephone.
1. Call your telephone number and wait
for the system to answer. If the
answering system is off, it will answer
after about ten rings and sounds a
series of beeps.
2. During the greeting message (or a
series of beeps when the answering
system is off), press 0 and enter your
PIN code within two seconds (see
“Setting a PIN Code” on page 60).
3. The answering system announces the
current time and the number of
messages stored in memory. You hear
“To play incoming messages, press
zero-two. For help, press one-zero”.
You will hear a beep.
4. Enter a command within 15 seconds,
each command there after must be
Ô NOTES Ô
• Time stamp will not be
heard until you have set
the time. See “Setting
Day and Time” on
page 24.
• The system will only
playback messages for
four minutes and then it
returns to the command
waiting mode. To
continue playing your
messages, press 0 then
2 again within 15
seconds.
• If you enter an incorrect
PIN code three times,
you will hear a beep and
the system will return to
standby.
• During the remote
operation,
“Line Remote”
appears on the handset.
• If the answering system
is recording an incoming
message, the recording
operation is canceled
when you start remote
43-3880.book Page 68 Monday, June 28, 2004 2:07 PM