Filter
Top Products
Setting Menu Options
19
DirectLink Mode
In DirectLink® mode, a pair of handsets can
function as two-way radios. DirectLink Mode
allows two handsets to communicate with
each other without the base unit or a
telephone line. Use them at sporting events
or while shopping to stay in contact with
family members or friends. You must set
both handsets to DirectLink Mode to
activate this feature. Ô
Using DirectLink Mode (Handset only)
1. Press
MENU/DEL and select the
DirectLink Mode menu. To enter
DirectLink mode press
[SELECT]
appears.
2. Press
SELECT/ to enter DirectLink
mode. You will hear a confirmation
tone, and
DirectLink Mode
Complete
appears.
3. To return to normal mode, press
MENU/
DEL
, and then press SELECT/ , or
return the handset to the cradle.
Room/Baby Monitor
This feature allows you to monitor sounds in
another room. Place the base or a handset
in the room you wish to monitor; it will
function as a microphone. A second
handset can be set to function as a remote
speaker, allowing you to monitor sounds in
the room. Ô
Using Room/Monitor
1. Press
MENU/DEL (or the MENU soft key
on the base) and select the Room
Monitor menu.
To Room Monitor (or
Listen to; on the base) appears.
2. Select the handset or base you want to
monitor by using .
Ô NOTES Ô
DirectLink Mode
• You must have at least
two handsets to use
Direct Link Mode.
Room/Baby Monitor
• This feature only works
when the handset(s) is
within the range of the
base.
• You can monitor a room
using the corded
handset. While
monitoring the room
from the base, pick up
the corded handset.
43-3880.book Page 19 Monday, June 28, 2004 2:07 PM