Filter
Top Products
Setting Menu Options
26
1. Press
MENU/DEL (or the MENU soft key
on the base). Select the Global Setup
menu, and then the Dial Mode
submenu.
2. Press to select
Tone or Pulse
(the initial setting is Tone).
3. Press
SELECT/ (or the OK soft key
on the base). You will hear a
confirmation tone.
System Reset (Handset only)
System Reset is used to clear the handset’s
ID from the main base unit, or the base ID
from the handset.
De-register the Handset
Deregister HS clears the handset ID from
the base. Use this option, for example,
when you change the digital security code.
1. Press
MENU/DEL (or the MENU soft key
on the base). Select the System Reset
menu, and then the Deregister HS
submenu.
2. Press
to select the handset ID to be
de-registered from the list, and then
press
SELECT/ . Deregister HS?
appears.
3. Press to select Yes, and then press
SELECT/ . You will hear a
confirmation tone.
When de-registration is complete,
Deregistration Complete
appears.
4. After de-registering the handset, move to
“Handset Registration” below. Ô
Ô NOTE Ô
Make sure to perform the
Handset Registration after
de-register the handset.
43-3880.book Page 26 Monday, June 28, 2004 2:07 PM