Filter
Top Products
The Integrated Answering Device
61
2. Press to select a Ring Time (Toll
Saver, 2 Times, 4 Times, or 6 Times)
(default is toll saver).
3. Press
SELECT/ (or the OK soft key
on the base). You will hear a
confirmation tone.
Setting the Record Time
Record Time sets the duration for recording
the incoming messages. You have three
record time options. The options “one
minute” or “four minutes” set the duration for
recording the incoming messages.
“Announce only” answers the call but
prevents the caller from leaving a message.
1. Press
MENU/DEL (or the MENU soft key
on the base). Select the Answ. Setup
menu, and then the Record Time
submenu.
2. Press to select Record Time (1
Minute, 4 Minutes, or Announce Only)
(default is one minute)
3. Press
SELECT/ (or the OK soft key
on the base). You will hear a
confirmation tone.
Setting the Message Alert On or
Off
Message Alert sounds an alert tone when
you have an unheard message. If you set
the Message Alert on, whenever a new
message is received, the soft alert tone will
sound every 15 seconds.
1. Press
MENU/DEL (or the MENU soft key
on the base). Select the Answ. Setup
menu, and then the Message Alert
submenu.
2. Press to select
On or Off (default
is off).
43-3880.book Page 61 Monday, June 28, 2004 2:07 PM