Filter
Top Products
Using the SIP Handset
PN: 1725-36038-001_B.doc 69
If you want to… Then…
Change the
ring volume
Press the up/down volume buttons on the side of the handset during ringing, or
while the handset is in standby mode.
Adjust the
speaker volume
While speakerphone is active, press the up/down volume buttons on the side of
the handset during the call.
Adjust the
headset volume
While the headset is plugged in, press the up/down volume buttons on the side
of the handset during the call.
Mute/Unmute a call
Press the Mute softkey.
When the handset is muted, the audio flowing icon
changes to the audio
receive-only icon
. Press the Mute softkey again to restore audio pickup.
End a call
Press the End softkey to maintain the active mode and view the active calls.
Press the END key on the keypad to return to the standby mode.
Change the profile
Press the Prof softkey and use the Nav keys to select a new profile while in
standby mode. The selected profile is marked with an asterisk (*).
Open Config menu
Press the Cfg softkey from standby mode.
Turn on the backlight
The backlight comes on when any key is pressed or when there is an incoming
call, and stays on for 10 seconds. It turns off if another key is not pressed within
that period.
Resume a call on hold
from standby.
Press the Resm softkey. If more than one call is on hold, use the Nav ef keys
to select the call you wish to resume and press the Resm softkey or NavOK.