Filter
Top Products
Using the SIP Handset
PN: 1725-36038-001_B.doc 67
If you want to… Then…
Forward calls
Calls may be forwarded on a per-line basis. The Line menu display will indicate
if a line is forwarded by a > character followed by the destination address.
• When a line is forwarded, the standby screen displays the forwarding
status, unless the do-not-disturb feature is enabled.
• If your handset has multiple lines, set or clear forwarding for each line
individually.
1 Press START or press Line and a line number to select the line that you want
to be forwarded.
2 Press FCN and select the Set/Clear Forward item from the FCN menu using
a digit key or NavOK key.
3 Enter the forwarding number for the indicated line.
4 Press NavOK to save.
To clear call forwarding for a given line #, again press START or select the line #.
Again select the Set/Clear Forward item from the menu.
Clear forwarding on a
line
Press START or select the line number. Select the Set/Clear Forward item from
the menu.
Listen to voicemail
1 Press START.
2 Press Msg softkey, or
Dial your voice message system number
3 Press START or Nav OK.
Do Not Disturb
(reject all incoming
calls)
1 Press START.
2 Press FCN.
3 Select the Do-Not-Disturb item from the menu and press NavOK.
When the do-not-disturb feature is enabled, the standby screen will display Do
Not Disturb. The handset will not ring for new incoming calls.
Clear Do Not Disturb
1 Press START.
2 Press FCN.
3 Select the Do-Not-Disturb item from the menu and press NavOK .
Redial the last
number you dialed
1 Press START.
2 Press the Redl softkey.
3 Verify that the displayed number is the one you want and the line number is
valid.
4 Press NavOK or START.