Filter
Top Products
SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
36 PN: 1725-36038-001_B.doc
and 802.11 mode are listed. Navigate to the desired level and
press
NavOK. This sets the transmit power level and exits the
Regulatory Domain menus. The Network Setup menu will again
display.
Diagnostics
Run Site Survey
The Site Survey mode is activated by selecting this option. The site
survey starts running immediately upon selecting this option. See the
Diagnostic Tools section for more information about site survey.
Diagnostics Mode
Diagnostics can be enabled or disabled. See Chapter 8 Diagnostic Tools,
section Diagnostics Enabled for a detailed explanation of the
Diagnostics
mode options.
Syslog Mode
See Chapter 8 Diagnostic Tools, section Syslog Mode for a detailed
explanation of the
Syslog mode options.
Error Handling Mode
The Error Handling mode determines how the handset will behave
when an error occurs. The
Halt on Error option will cause the handset
to stop operating if an error message is received. Unless the error is a
fatal one, normal operation may be resumed by power-cycling the
handset. The
Restart on Error option will cause the handset to make
every effort to reboot quietly and quickly to standby mode. In either
scenario, a call in progress will be lost.
Error detail may be shown on the display, captured by the syslog
server and may also be available for downloading with the Handset
Administration Tool.