Filter
Top Products
SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
28 PN: 1725-36038-001_B.doc
Daylight Savings
The handset may be adjusted for daylight savings time.
Password Enable/Disable/Change
The password option controls access to the Admin menu. It is enabled
by default with the password 123456. The
Password option operates as
a toggle between
Enabled and Disabled. The info line will display the
current state. Press
NavOK to change the password protection state. To
modify the password requirement, the default or previously set
password must be entered to verify the change.
Change Password will
appear only if the password is enabled. The password is disabled by
default. The password must be set in each handset for which
controlled access is desired.
SIP Registration
Individual handsets may be configured to correspond with the SIP
configuration information in the TFTP server. The handset is then
automatically identified at startup. If username and password
information is not configured in the Admin menu, then this
information will be requested at startup
In either case, the username must agree with a corresponding
configuration file. See Chapter 5 Programming the SIP Handset Features,
section SIP TFTP Server Configuration Files.
Login allows you to specify a username and password for
automatically acquiring SIP configuration information. If no
username is specified, the SIP handset will request username and
password at startup and any additional registrations specified here
are ignored.
The username should correspond to the primary (line 1) dial number
assigned to the user. The username and password should also
correspond to the authentication credentials as created by your
system administrator for your primary line registration. Usernames or
passwords can be erased by selecting the item, then pressing the
Bksp
softkey and then the
Save softkey.
Reg 2, Reg 3, and Reg 4 allow you to specify additional authentication
usernames and passwords that may be required by your handset for
any additional line appearances (registrations) that may appear in the
specific user’s configuration file. This information will be ignored if a
Login username is not provided.