Filter
Top Products
SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
10 PN: 1725-36038-001_B.doc
encapsulated for prioritization as they are routed to and from a SIP
proxy server. See the SpectraLink 8000 SVP Server Administration Guide
for SIP document for detailed information about this device.
SpectraLink 8020/8030 Wireless Telephone
Security
SpectraLink 8020/8030 Wireless Telephones support the 802.11i
standard including Wi-Fi Protected Access (WPA and WPA2) in the
pre-shared key (PSK) mode. As vendors introduce access points (APs)
that are eligible to become Wi-Fi CERTIFIED for WPA-PSK and/or
WPA2-PSK, Polycom will determine compatibility with the
SpectraLink 8020/8030 Wireless Telephones and include these APs on
the Polycom WLAN Compatibility Table.
SpectraLink 8020/8030 Wireless Telephones support basic WMM as
part of the 802.11e standard. If the AP supports WMM, the handset
automatically discovers and uses it. WMM does not replace the
SpectraLink 8000 SVP Server as described in the first paragraph.
WMM settings must be configured on the SpectraLink 8000 SVP
Server.
The SpectraLink 8020/8030 Wireless Telephone supports Wired
Equivalent Privacy (WEP) as defined by the 802.11 standard. Polycom
offers the product with both 40-bit and 128-bit encryption.
The latest software versions are required to support the features
described in this document.
Quick Start Guide
1. A wireless LAN must be properly configured and operational
through the use of 802.11 wireless APs.
2. A TFTP server must be available on the network in order to load
the appropriate software onto the handsets. See Chapter 3 Software
License and Protocol Management for detailed instructions for
loading software on handsets.
3. The supported SIP system components must be connected to your
network and completely operational.