Filter
Top Products
PN: 1725-36038-001_B.doc 21
SpectraLink 8020/8030 Wireless
Telephone Configuration
Each handset may be configured for site-specific requirements by
opening the Admin menu and selecting options or entering specific
information. Any settings entered in the Admin menu must conform
to system settings. Only the handset being configured is affected by
the Admin menu settings.
The wireless telephone user may select several usability options from
the Standby menu, described below in the User-defined Preferences
section. This information is also provided in the end-user manual.
The SpectraLink Handset Administration Tool is a software utility
that enables rapid configuration of handsets by utilizing the USB port
on the Dual Charger. See the Handset Administration Tool document
for specific instructions. Please see your service representative or
contact Polycom customer service for more information about this
time-saving tool.
The Admin Menu
The Admin menu contains configuration options that are stored
locally (on each handset). Each handset is independent, and if the
default settings are not desired, the Admin options must be set in
each handset requiring different settings.
Opening the Admin menu
1. With the handset powered off, press and hold the START key.
While holding the
START key, press and release the END key.
2. When the Admin menu appears, release the
START key.
2