Filter
Top Products
SpectraLink Wireless Telephone Configuration
PN: 1725-36038-001_B.doc 29
OAI Enable/Disable
Polycom’s Open Application Interface (OAI) enables third-party
computer applications to display alphanumeric messages on the
handset display and take input from the handset keypad. Refer to the
OAI Specification (Version 2.0) documentation for information about
administering the OAI Gateway and the services it can provide.
If you have an OAI Gateway installed in your system, OAI may be
optionally enabled in each handset. You may select whether the
handset should attempt to connect to the SpectraLink 8000 OAI
Gateway by choosing either the
Enable or Disable options in this menu.
If OAI is enabled, and an IP address (called the
OAI Server IP) is
available to the handset (either via DHCP or Static IP configuration),
the handset will communicate with the OAI Gateway at power-on,
and periodically while it is powered-on. If you don’t have a
SpectraLink 8000 OAI Gateway installed at your site, you should
disable the OAI feature to preserve network bandwidth and battery
life.
Location Service
Location service may be used to enable or disable the Ekahau Real-
Time Location System (RTLS), select a transmit interval, or enter a
static IP address for the Ekahau Positioning Engine (EPE). Location
services capability is provided by the EPE 4.0 using Ekahau Location
Protocol (ELP). See Ekahau’s user documentation for more
information.
RTLS [Enable/Disable] The RTLS is disabled by default. Press NavOK to
toggle to the alternate setting. When RTLS is enabled, the handset will
display the RTLS icon
in the top center of the screen.
The ring indicator icon will take precedence over the RTLS icon, i.e.
the new icon will not be visible while the handset is ringing. When
ringing has ceased and the ring indicator becomes inactive, the RTLS
icon will again appear (regardless of hook state).
Transmit interval Allows selection of 1 minute, 5 minutes, or 10 minutes for
maximum time between transmit intervals. Default transmit interval
is 10 minutes. Press
NavOK to select the desired transmit interval.