Filter
Top Products
Programming the SIP Handset Features
PN: 1725-36038-001_B.doc 51
Proxy server commands
Use the following parameters when programming the configuration
files. See the sample configuration files following this table for more
detailed information.
Parameter Value Description Notes
PROXYn_ADDR
xxx.xxx.xxx.xxx:pppp
or
Proxy address. n = 1, 2, 3
xxx.xxx.xxx.xxx = IP4 address
pppp = port (optional, 5060 is the
default)
proxyname:pppp
proxyname = computer name
(DHCP only)
PROXYn _DOMAIN Domain name
Domain served by this
proxy server.
n = 1, 2, 3
DOMAIN = [example:
spectralink.com]
Can be omitted if the proxy does
not act as a domain server.
PROXYn_TYPE Inter-Tel
SER
Asterisk
2
Specify the
manufacturer of each
defined proxy server.
Used by the handset to perform
proxy-specific actions based on
known behavior for specific proxy
types. Only the three shown
values may be used. Omit this
parameter if the value is not one
of these recognized settings.
PROXYn_
KEYPRESS_2833
enable
disable
Controls generation of
in-stream RFC2833
formatted key press
events.
n = 1, 2, 3
PROXYn_
KEYPRESS_INFO
enable
disable
Controls generation of
SIP INFO requests to
the SIP server for
keypress events.
n = 1, 2, 3
PROXYn_HOLD_IP0
enable
disable
Controls setting of the
media stream IP
destination address to
0 (zero) when a call is
put on hold.
n = 1, 2, 3
Use for compatibility with older
SIP servers that may not
recognize newer stream attribute
parameters for HOLD status.
2
For up-to-date Asterisk voicemail commands, go to:
http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+VoiceMailMain