Filter
Top Products
3.2 PC Programming
322 Feature Guide
Notice
1. During a long programming session, it is highly recommended that you periodically
save the system data to the SD Memory Card. You can think of system data as stored
in RAM, whereas SD Memory Card as stored on a hard disk. If the PBX undergoes a
sudden power failure or system reset for some reason, all the system data in RAM will
be lost.
To save the system data to the SD Memory Card, (1) click the "SD Memory Backup"
icon before resetting the PBX or turning off the power, or (2) exit the Maintenance
Console so that the PBX starts automatically saving the system data.
2. When the PBX is initialised, not all data is taken from the SD Memory Card. The data
for present status of extension FWD/DND buttons is taken from battery backup
memory in the PBX.
6. When country/area data do not match:
a. Click [OK] to replace the country/area
data of the PBX. Replacement may take
several minutes to complete.
b. Follow the procedure described in
Section 2.13.1 Starting the Hybrid IP-
PBX (for KX-TDA100/KX-TDA200) or
6.12.1 Starting the Hybrid IP-PBX (for
KX-TDA15/KX-TDA30) in the Installation
Manual and restart the PBX.
c. Repeat steps 2 to 4 to restart the
Maintenance Console.
7. Follow the instructions of the wizard and
assign the basic items (Quick Setup).
The programme menu appears.