Filter
Top Products
1.9 Automatic Route Selection (ARS) Features
114 Feature Guide
[Programming Procedures]
1.
ARS Mode Assignment ( ARS Mode [320])
It is possible to select whether ARS operates when an extension user makes a call using
any Idle Line Access method or when an extension user makes a call using any Trunk
Access method. ( 1.5.5.3 Trunk Access)
2. Leading Number Exception Table Assignment
Store the telephone numbers that will avoid using the ARS feature.
3. Leading Number Table Assignment
Store the area codes and/or telephone numbers as leading number that will be routed by
the ARS feature. In this table, the Routing Plan (refer to "4. Routing Plan Table
Assignment") is selected for each number.
The additional (remain) number of digits must be assigned only when "#", for example, is
needed after a dialled number. The "#" is added after the assigned number of digits of
dialled number (excluding a leading number).
If a dialled number matches a leading number, the number will be modified according to
the corresponding Routing Plan Table and the modified number will be sent to the trunk
when the assigned additional (remain) number of digits are dialled.
If a dialled number matches multiple leading number entries, the leading number entry
with the lowest numbered location will have priority.
*1
:
ARS Exception Number [325]
*1
:
ARS Leading Number [321]
*2
:
ARS Routing Plan Table Number [322]
1
2
ARS Leading Number Exception Table
Location
No.
001
002
:
Leading No.
Exception
*1
033555
06456
:
2
3
4
ARS Leading Number Table
Location
No.
0001
0002
0003
:
Routing Plan
Table No.
*2
1
4
5
:
Additional (Remain)
No. of Digits
7
0
5
:
3
Leading
No.
*1
039
03
0444
: