Filter
Top Products
1.27 Audible Tone Features
Feature Guide 245
1.27 Audible Tone Features
1.27.1 Dial Tone
Description
The following dial tones inform extensions about features activated on the extensions:
Each dial tone type has two frequencies (e.g., dial tone 1A and dial tone 1B).
Conditions
• Dial Tone Type A/B
It is possible to select dial tone type A or B for dial tones 1 through 4. If "Type A" is
selected, all dial tones 1 through 4 will become dial tone type A.
The dial tone type for the ARS feature can be selected separately. If "Type A" is selected
for the ARS, dial tone 1A will be heard. If "Type B" is selected, dial tone 1B will be heard.
• Distinctive Dial tone
Distinctive dial tone mode can be disabled. In this case, dial tone 1 will be sent.
• Dial Tone Patterns
All dial tone patterns have a default ( 4.2.1 Tones/Ring Tones).
• Only dial tone 1 is sent to the extensions in the VM (DPT/DTMF) group. ( 1.23.1 Voice
Mail (VM) Group)
Type Description
Tone 1A/1B A normal dial tone is heard when:
a) No features listed for dial tones 2 through 4 has been set, or
b) ARS is used.
Tone 2A/2B Any one of the features below is set.
• Absent Message
•BGM
•FWD
• Call Pickup Deny
• Call Waiting
• DND
• Extension Lock
• Executive Busy Override Deny
• Hot Line
• Timed Reminder
Tone 3A/3B While a called PS is being searched, or any one of the features
below is performed.
• Account Code Entry
• Consultation Hold
• Answering a Timed Reminder call with no message
Tone 4A/4B Messages are waiting for the extension.