Filter
Top Products
1.1 Incoming Call Features
22 Feature Guide
[Programming Example of DID/DDI Table]
DDI can be programmed as DID.
Note
Tenant number and VPS trunk group number can also be assigned in the DID/DDI table.
Tenant number is used to determine the time mode (day/lunch/break/night) for the
corresponding DID/DDI number. VPS trunk group number is used in Voice Mail DPT
(Digital) Integration ( 1.23.3 Voice Mail DPT (Digital) Integration).
Explanation:
If the DID/DDI number is "123-4567":
1. Checks the number in the table.
Matches the number in location 0001.
2. Checks the time mode.
In Day mode:
CLI is enabled. Route to CLI destination.
In Lunch mode:
CLI is disabled. Route to DID/DDI destination, extension 100.
Conditions
• To use this feature, the DID/DDI service must be assigned for a trunk port as the
distribution method ( BRI DIL/DDI/MSN Selection [421] *For BRI only).
• DID/DDI Number Modification
It is possible to modify a received DID/DDI number, which may be convenient when
programming the DID/DDI table. Modification method (removed number of digits/added
number) can be programmed on a trunk port basis.
[Modification Example]
Locat
ion
DID/DDI
No.
*1
DID/DDI
Name
*2
CLI
DID/DDI Destination
*3
Day Lunch Break Night Day Lunch Break Night
0001 123-4567 John White
Enabl
e
Disabl
e
Enabl
e
Disabl
e
105 100 105 100
0002 123-2468 Tom Smith
Enabl
e
Disabl
e
Disabl
e
Disabl
e
102 100 102 100
0003 123-456 A company
Enabl
e
Disabl
e
Disabl
e
Disabl
e
101 101 101 100
:: :::::::::
*1
:
DID Number [451]
*2
:
DID Name [452]
*3
:
DID Destination [453]
Removed number of digits: 6
Added number: 10
Received DID/DDI number: 87654321
Modified DID/DDI number: 876543 21 = 102
1
1) Remove the
first 6 digits.
2) Add "10".