Peerless Industries KX-TDA200 IP Phone User Manual


 
3.2 PC Programming
320 Feature Guide
Installing the Maintenance Console and Selecting the Appropriate
Country/Area Data
Notes
To install or uninstall the software into Windows 2000 Professional or Windows XP
Professional, the user must be grouped either of "Administrators" or "Power Users".
To connect the PC to the PBX via USB, the KX-TDA USB driver must have been
installed. Follow the instructions of the wizard to install the KX-TDA USB driver.
The contents and design of the software are subject to change without notice.
Starting the Maintenance Console and Assigning the Basic Items
(Quick Setup)
When you start the Maintenance Console with the Installer Level Programmer Code and
connect to the PBX for the first time after initialisation (with the factory default setting), Quick
Setup will launch automatically. For details about Quick Setup items, refer to Section 2.3.3
Quick Setup.
1.
a. Save the setup file of the Maintenance
Console on your PC.
b. Double-click the icon to execute the
setup file.
c. Follow the instructions of the wizard.
2.
a. Type the appropriate Country Code.
The Maintenance Console will be
installed with the appropriate default
data for your country/area.
b. Click [Next].
c. Follow the instructions of the wizard.
d. Click [Finish].
e. Click [OK].
1. Connect the PC to the PBX with a USB cable.
2. Start the KX-TDA Maintenance Console or
KX-TDA30 Maintenance Console from the
start menu.