Filter
Top Products
1.17 Caller ID Features
166 Feature Guide
a) When the PS is out of range.
b) When the PS is turned off.
c) When the CS is busy.
• Incoming Call Log Display Lock
An extension user can lock the Incoming Call Log display to prevent other users from
referring to the call information at his extension through personal programming (Directory
and Call Log Lock). In this case, the Outgoing Call Log display and the Personal Speed
Dialling number display is also locked. An extension personal identification number (PIN)
is required to use this feature. ( 1.26.1 Extension Personal Identification Number (PIN))
• Storing the Call Log Information in Personal Speed Dialling
When storing the number and name into Personal Speed Dialling from the call log
information, the Idle Line Access number is automatically attached to the telephone
number.
• Incoming Call Log Memory
The total memory for the Incoming Call Log is determined in the PBX. The maximum
number that can be logged for each extension and incoming call distribution group is also
determined through system programming. If the memory becomes full, the new call record
overwrites the oldest one.
Feature Guide References
1.6.1.5 Speed Dialling—Personal/System
1.19.2 Flexible Buttons
User Manual References
User Manual
1.11.1 Using the Call Log
3.1.2 Settings on the Programming Mode