Filter
Top Products
1.12 Holding Features
Feature Guide 133
If the following occurs frequently with an SLT, choose "Mode 2", "Mode 3", or "Mode 4":
a) When an SLT user receives a call, reorder tone is heard or nobody answers the
call.
b) When an SLT user goes off-hook, reorder tone is heard instead of a dial tone.
If a call is not terminated after going on-hook, the above cases occur. To avoid these
problems, choose "Mode 2", "Mode 3", or "Mode 4". Every call will be terminated unless
the Hold feature number is entered after flashing the hookswitch in Mode 2, Mode 3, and
Mode 4.
• Hold Alarm tone pattern has a default. ( 4.2.1 Tones/Ring Tones).
User Manual References
User Manual
1.4.2 Holding a Call
Hold Transfer to Trunk Transfer to Extension
Mode 1
Flashing the hookswitch
+
Going on-hook
Flashing the hookswitch
+
Trunk Access No.
Flashing the hookswitch
+
Extension No.
Mode 2
(Default)
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
Flashing the hookswitch
+
Trunk Access No.
Flashing the hookswitch
+
Extension No.
Mode 3
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
Flashing the hookswitch
+
Hold Feature No.
+
Trunk Access No.
Flashing the hookswitch
+
Extension No.
Mode 4
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
Flashing the hookswitch
+
Hold Feature No.
+
Trunk Access No.
Flashing the hookswitch
+
Hold Feature No.
+
Extension No.