Filter
Top Products
1.15 Broadcasting Features (KX-TDA30/KX-TDA100/KX-TDA200 only)
144 Feature Guide
A member extension can inform to the caller that he wants to speak or join the conversation by
sending a notification. The caller will hear a notification tone and the requesting extension’s
information will be shown on the display for five seconds.
Conditions
• Hardware Requirement: The MEC card
• COS programming determines the extensions (PTs only) that can use this feature.
• Ring Duration
A system timer is available to limit the call ring duration at the members. When this limit is
reached, members' telephones will stop ringing. If no members have answered the call,
the caller will hear a busy tone.
• The broadcasting call will reach a member extension regardless of settings such as Call
Forwarding (except DND).
• If a member extension is busy and has Call Waiting for trunk calls activated when a
broadcasting call is made, a call waiting tone will be sent to the extension.
• The call information of the caller (not members) will be recorded on the SMDR.
• A caller cannot make a broadcasting call with a call on hold.
• Call Pickup is not available for a broadcasting call. ( 1.4.1.3 Call Pickup)
• The broadcasting call will not reach members when:
Installation Manual References
Installation Manual
<KX-TDA100/KX-TDA200>
2.3.2 MEC Card
<KX-TDA15/KX-TDA30>
6.5.6 MEC Card
Button Function
DSS Establishes a conversation with the corresponding member
extension, or remove the extension from the conversation.
CONF (Conference) Establishes a conversation with the current members in the order
assigned in the broadcasting group. Pressing this button again
will add the next available member in the group to the
conversation.
TRANSFER Removes the member who joined the conversation last. The
member can still listen to the announcement.
FLASH/RECALL
(Flash/Recall mode)
Removes the member who joined the conversation last. The
member will be disconnected from the broadcasting call and hear
a reorder tone.
SP-PHONE Enables a hands-free conversation.
– the member extension has set DND for intercom calls.
– the member extension is a PS in Wireless XDP Parallel Mode. ( 1.24.5
Wireless XDP Parallel Mode)