Filter
Top Products
1.3 Telephone Features and Operation
38 Operating Manual
1.3.7 Call Monitor
A preprogrammed extension user can listen to the ongoing conversation of a busy extension user.
To monitor
1.3.8 Call Park
You can put a call on hold in a common parking zone of the PBX so that any extension can retrieve the
parked call. You can use this feature as a transferring feature.
A call can be put into either a specified parking zone (Specified) or any idle parking zone (Auto). If a Call
Park button and Call Park (Automatic Park Zone) button have been established, you can select either way
to park by simply pressing the corresponding button.
When a call is parked automatically, or more than one call has been parked at the same time, you need to
specify the parking zone number to retrieve the required call.
To set
• If Automatic Call Hold has been preprogrammed, you can put the current call on hold
automatically by pressing another CO, ICD Group or INTERCOM button to make or answer
another call.
• For the Call Hold Retrieve operation using a PDN/SDN button, refer to "1.3.49 PDN (Primary
Directory Number)/SDN (Secondary Directory Number) Extension (KX-TDA100/KX-TDA200/
KX-TDA600 only)".
PT/SLT/PS
Enter 5.
5
Press red DSS, PDN, or SDN,
or dial extension number.
B.Tone
Off-hook.
C.Tone
Monitoring starts
extension no.
(DSS)
(SDN)
OR
OR
(PDN)
OR
During a conversation
Press Call Park.
PT/PS
(Call Park)