Filter
Top Products
3.1 Personal Programming
168 Operating Manual
3.1.4 Customizing the Buttons
You can change the flexible CO buttons/DSS buttons, and programmable feature (PF) buttons on PTs, DSS
Consoles, Add-on Key Modules, and PSs to the following function buttons. For example, if your telephone
has more CO buttons than available CO lines, you may change unused CO buttons to one-touch buttons.
• To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
Buttons
Programmable
Button
Programming Input
CO DSS PF
Loop-CO (L-CO)
Group-CO (G-CO)
+ CO line group no. (2 digits)
Single-CO (S-CO)
+ CO line no. (3 digits)
Direct Station Selection (DSS)
+ Extension no.
One-touch Dialing*
1
+ Desired no. (max. 32 digits)
Incoming Call Distribution
Group (ICD Group)
+ Incoming call distribution group
extension no. (+ + delayed ringing time [0–7])*
3
Message
Message for Another
Extension
+ Extension no./Incoming call distribution
group extension no.
Call Forwarding (FWD)/Do Not
Disturb (DND)—Both calls
FWD/DND—Outside calls
FWD/DND—Intercom calls
Press PROGRAM
or PAUSE.
Press PROGRAM
or PAUSE.
Press CO,
DSS or PF.
To exit
To program
To enter the program mode
Follow
programming
input.
To continue
(CO, DSS, PF)
programming
input
OR
PROGRAM
PAUSE
OR
PROGRAM
PAUSE
Press ENTER
or STORE.
OR
AUTO DIAL
STORE
#
0
1
2
*
²
3 0
#
4 0
4 0
4 1
4 2
4 3