Filter
Top Products
1.1 Before Operating the Telephones
22 Operating Manual
Customized Buttons
If the term is in parentheses like (Account) in this section, it means a flexible button has been made into an
"Account" button. To customize, refer to "3.1.4 Customizing the Buttons".
PROGRAM:
Used to enter and exit the Programming
mode.
ANSWER:
Used to answer an incoming call.
RELEASE:
Used to disconnect the line.
Navigator Key/Jog Dial/Volume Key:
Used to adjust the volume and the display
contrast or select desired items.
Programmable Feature (PF):
Located on the upper part of the CO
button array or on the DSS Console.
Assigns the desired button and used to
access the stored feature. Mostly used as
a One-touch Dialing button. (Only the "F
and number" may be shown on some
telephones.)
MODE:
Used to shift the display to access various
features.
SELECT:
Used to select the displayed item or to call
the displayed phone number.
SHIFT:
Used to access the second level of Soft
button features.
ENTER:
Used to confirm the selected item.
CANCEL:
Used to cancel the selected item.
Buttons Feature
Loop-CO (L-CO)
Used to access an idle CO line for making outside calls.
Incoming outside calls from any CO line arrive at this button.
Group-CO (G-CO)
Used to access an idle CO line in a specified CO line group for making outside
calls.
Incoming calls from CO lines in the assigned CO line group arrive at this button.
PROGRAM
ANSWER
RELEASE
VOL
(PF)
MODE
SELECT SHIFT