Filter
Top Products
1.3 Telephone Features and Operation
Operating Manual 111
To check in a guest
• The hotel operator must be using a 6-line display PT to use the Room Status Control features.
• While in Room Status Control mode:
a. The hotel operator's extension can only check extensions in or out. All other operations
will be ignored.
b. The light of each DSS button shows the room status of the corresponding extension as
follows:
Off: Check-out
Red on: Check-in
[Light Pattern Example: Check-in Mode]
c. The lights of other buttons may not show their normal display.
d. The hotel operator's extension is considered to be busy. Callers to that extension will hear
a busy tone.
Room1230
DSS button
Room1231
Room1232
Room1233
Room1234
Check-in button
Check-out button
Rooms 1230 and 1234
are currently in
check-in status.
Press Check-in. Dial extension number and then press
"ENTER", or press desired DSS.
OR
extension no.
(DSS)
While on-hook
ENTER
Press "YES". Press "EXIT"
or Check-in to finish.
EXIT
OR
(Check-in)
(Check-in)
6-Line Display PT
Room: 1234
Confirm check in?
NO YES
Enter Room Number
EXIT ENTER
To continue