Filter
Top Products
63
Chapter 4
Multi-Unit User Operations
1 Follow steps 1 to 4 on page 62.
2 Press .
•The current registered handset number(s)
is/are displayed.
3 Enter the handset number you want to
ring.
•The selected handset number flashes.
•If you misdial, press the number again.
4 Press .
•The handset number is stored.
•The current ring count is displayed.
3
Input Command
1 3-123456
Selecting first handset
One handset will ring first, then all other
handsets will ring if the first handset is not
answered. You can choose which handset will
ring first and the ring count (1 to 6) until all of
the handsets ring. The factory preset is 3 rings.
Selecting all handsets
When a call is received, all handsets will ring at
the same time.
1 Follow steps 1 to 4 on page 62.
2 Press .
3 Press .
•A beep sounds.
•To return to the standby mode, press
.
1
5
Press a dialing button to to
select the ring count.
6 Press .
•A beep sounds.
•To return to the standby mode, press
.
6
1
Ex. Handset 2 is selected.
Input Command
1 1
•Even if you select “Specified handset(s)” or
“First handset”, calls can also be received on
the handsets which do not ring.
TCD715NLM(E)-8Multi 01.9.17 8:22 PM Page 63