Filter
Top Products
14
Summary of Programmable Functions
Handset settings
You can program the following function items using the handset near the base unit. The display
shows the instructions. After selecting “Setting Handset”, the main menu is displayed. Most
items in the main menu have a sub-menu. The sub-menu is shown after selecting the item in the main
menu. See the corresponding pages for function details. Main menu items are written in bold and sub-
menu items are under each main menu item on the next page.
Make sure that the power is ON (p. 11) and the unit is in the standby mode.
New Phonebook
H
Setting Handset
Setting Base
<Standby mode>
<Function menu>
*
Press .
Press .
Base 1
12 New Calls
12.05 13:58
While programming:
*
To select a desired function item, press or until the arrow points to the item. Then press
to go to the next step.
•You can press to go to the next menu of the function menu instead of pressing .
•To return to the previous step during programming, press or .
C
•You can exit the programming mode any time by pressing .
•When programming is completed, a beep sounds.
TCD715NLM(E)-2Preparation2 01.9.17 8:09 PM Page 14