Filter
Top Products
56
Clearing the Settings in Memory
Initial setting
Talk mode display Length of the call
Display language French
Backlight color Green
Call prohibition OFF
Direct call number Clear
Direct call mode OFF
Handset PIN 0000
Auto talk OFF
Base unit access Automatic base
unit access
Handset receiver volume MEDIUM
Redial memory All clear
Time Alarm Clear
Alarm ON/OFF OFF
Handset ringer volume MEDIUM
External ringer type 1
Internal ringer type 1
Paging type 1
Alarm type 1
Key tones ON
Call waiting tone ON
Range warning alarm OFF
Battery low alarm ON
Standby mode display Base unit number
On the handset
This function enables the handset to clear the following settings at one time. They will return to their
initial settings.
1 Press .
2 Press or until the arrow points
to “Setting Handset”, then press
.
3 Press or until the arrow points
to “Reset Handset”.
4 Press .
5 Enter the 4-digit handset PIN (p. 55).
•“Reset Handset” is displayed.
6 Press or to select “YES”.
7 Press .
•A beep sounds and “CLEARED” is
displayed.
•To return to the standby mode, press
.
Enter H/set PIN
1234567890 :
----
Registration
Select Base
H
Reset Handset
Function
Initial setting
Function
TCD715NLM(E)-7Advance2* 01.9.17 8:19 PM Page 56