Panasonic KX-TCD715NLM Telephone User Manual


 
49
Chapter 3
Advanced Operations
If You Use International Carrier Services
Automatic Route Selection (ARS) is also used for international calls.
After subscribing to a second international carrier service, store the second international carrier code
(see page 48). For certain countries, the second international carrier service costs more than the first
carrier service. Store “00 (international code)” and those country codes (up to 25 codes) instead of
area codes (see page 48).
Ex. Second international carrier code: 1605
Country code: 0033 (The first carrier service is cheaper.)
Dialed number: 0044–55789 Sent number: 1605–0044–55789
Dialed number: 0033–55789 Sent number: 0033–55789
If you stored a phone number with “00” in the speed dialing memory and use a second carrier
service which does not require “00”, turn the “00” delete mode ON.
To turn the international code “00” delete mode ON/OFF
Some international carrier services do not require “00” before the country code. In this case, turn the
delete mode ON by programming. “00” will be automatically deleted when dialing. The factory preset is
OFF.
Ex. Second international carrier code: 1888 (This service does not require “00”.)
Delete mode: ON
Dialed number: 0044–55789 Sent number: 1888–4455789
1 Press .
2
Press or until the arrow points
to “Setting Base”, then press .
Input Commandis displayed.
3
Press .
4
Enter the 4-digit base unit PIN (p. 55).
5 Press .
The current mode is displayed.
0: OFF 1: ON
3
9
6 To select ON, press .
OR
To select OFF, press .
7 Press .
A beep sounds.
To return to the standby mode, press .
0
1
Input Command
93 09-1
Ex. ON is selected
TCD715NLM(E)-6Advance1 01.9.17 8:16 PM Page 49