Filter
Top Products
Base 1
10 New Calls
12.04 15:00
Battery strength
You can check the present battery strength on the display.
Battery Charge
At the time of shipment, the batteries are not charged. To charge,
place the handset on the base unit. Please charge the batteries
for about 15 hours before initial use. During charging the battery,
battery icon is as shown below.
Recharge
When “” flashes or the unit beeps every 15 seconds,
recharge the batteries.
Battery strength
Display prompt
Fully charged MediumHigh Low
Need to be charged.
(Flashing)(Flashing)
(Flashing)
Full <During charge>
10
Settings
Installing the Batteries in the Handset
Install the batteries as shown. Then install the handset cover.
•If the rechargeable batteries are not inserted correctly, the handset will not work.
TCD715NLM(E)-1Preparation1 01.9.17 8:07 PM Page 10