Filter
Top Products
44
Call Prohibition
7 Press .
•A beep sounds and “ ” is displayed.
8 Press to return to the standby
mode.
• The call prohibition mode is now in effect.
To turn OFF the call prohibition
mode
Press or to select “OFF” in step 6.
• After returning to the standby mode, “”
will go out.
You can prohibit anyone from making a call with your handset except for emergency calls. Incoming
calls are accepted. To use this feature, turn on the call prohibition mode by programming. The factory
preset is OFF.
Make sure that the power is ON (p. 11) and the unit is in the standby mode.
1 Press .
2 Press or until the arrow points
to “Setting Handset”, then press
.
3 Press or until the arrow points
to “Call Option”, then press .
4 While “Call Bar” is at the arrow,
press .
5 Enter the 4-digit handset PIN (p. 55).
•The current mode is displayed.
6 Press or to select “ON”.
If you forget your handset PIN, please
consult your nearest Panasonic Service
Center.
Enter H/set PIN
1234567890 :
----
Base 1
8 New Calls
TCD715NLM(E)-6Advance1 01.9.17 8:16 PM Page 44