Palm Zire 31 PDAs & Smartphones User Manual


 
Zire™ 31 Handheld 379
Uwaga
Static Electricity, ESD, and your palmOne™ handheld
Electrostatic discharge (ESD) can cause damage to electronic devices if discharged into the device, so you
should take steps to avoid such an occurrence.
Description of ESD
Static electricity is an electrical charge caused by the buildup of excess electrons on the surface of a material.
To most people, static electricity and ESD are nothing more than annoyances. For example, after walking over
a carpet while scuffing your feet, building up electrons on your body, you may get a shock -- the discharge
event -- when you touch a metal doorknob. This little shock discharges the built-up static electricity.
ESD-susceptible equipment
Even a small amount of ESD can harm circuitry, so when working with electronic devices, take measures to
help protect your electronic devices, including your palmOne handheld, from ESD harm. While palmOne
has built protections against ESD into its products, ESD unfortunately exists and, unless neutralized, could
build up to levels that could harm your equipment. Any electronic device that contains an external entry point
for plugging in anything from cables to docking stations is susceptible to entry of ESD. Devices that you carry
with you, such as your handheld, build up ESD in a unique way because the static electricity that may have
built up on your body is automatically passed to the device. Then, when the device is connected to another
device such as a docking station, a discharge event can occur.
Precautions against ESD
Make sure to discharge any built-up static electricity from yourself and your electronic devices before
touching an electronic device or connecting one device to another. The recommendation from palmOne is
that you take this precaution before connecting your handheld to your computer, placing the handheld in a
cradle, or connecting it to any other device. You can do this in many ways, including the following:
Ground yourself when you’re holding your mobile device by simultaneously touching a metal surface that
is at earth ground.