Zire™ 31 Handheld 16
CHAPTER 1 Setting Up Your Handheld and Your Computer
MAC ONLY
0
1 Begin synchronization:
a. Connect the HotSync cable to the USB port on your computer, and then
insert the other end into the mini-USB connector on your handheld.
b. Make sure your handheld is on.
c. Tap HotSync
.
2 Select the profile you want to
load on the handheld, and
click OK.
The next time you synchronize that handheld, Palm Desktop
software prompts you to assign a username to the handheld.
Done