Filter
Top Products
RTU-292 Operations Manual
7 RTU-292 Options
7.1 GENERAL
Included in this section are installation instructions for field installable RTU-292 options and
set-up instructions for all options that have configuration dipswitches, jumpers, potentiometers,
etc. Operational instructions are provided for all options other than the Voice Prompt Option;
this frequently used options is explained along with standard unit operation in section 3. JPS
may be able to install a software option by connecting with your existing RTU-292 via
telephone; request this service when ordering. Spares kits and the 19” Rack Mount Kit are
listed in section 1.
7.1.1 Special Software Versions
The options listed in the section may or may not be installable in an RTU-292 that has special
software created by JPS to fit a non-standard application. If your RTU-292 has special
software, consult JPS customer service before ordering options.
Table 7-1 RTU-292 Options
Item JPS P/N Description
Hardware Options
Local Phone Option 5930-596000 Allows remote operation of the RTU-292 through the use of
a standard telephone set connected directly to the RTU-292
Local Phone port. (Telephone set and cable not supplied.)
DTMF Telephone Set 5930-599000 Telephone set for use with the Local Phone Option
Voice Prompt Option 5930-595000 Standard Version (English, female voice)
VMM-100 Option 5930-591100 Provides DSP Voice Modulation Recognition squelch and/or
DSP Noise Reduction to the radio RX input.
STU-III Option 5960-796000 Allows connection to a STU-III phone
Software Options
Call Logging S/W Option 5970-791500 Provides record of calls via RS-232 interface.
Radio Control Option 5970-795000 Provides remote control of URC-200 radio via RS-232 int.
Squelch Break Access
Option
5970-791300 Allows radio access to the RTU-292 via a series of squelch
breaks
DTMF Access Option 5970-799000 Allows radio access and control via the radio’s DTMF
keypad.
JPS Communications, Inc.
7-1