Filter
Top Products
RTU-292 Operations Manual
2.11 INSTALLATION CHECKLIST
Table 2-20 Installation Checklist
Provide suitable Mounting and Cooling. See Section 2.5.
Check AC Line voltage selection. See Section 2.7.
DC Operation needed? See Section 2.7.
Make Interconnections. See Section 2.9 for External Interconnect Information.
Serial Remote Control needed? Set Serial Remote Baud Rate with SW1-1 and 2. See RS-
232 protocol in Section 5.
Set TX/RX Audio Levels if necessary. See Table 2-1 and Section 2.10.
Set Telephone Line Levels if necessary. See Table 2-1 and Section 2.8.
Are other Factory Default Settings correct for
this system?
See Table 2-1 and Table 3-2.
Make necessary changes as explained in sections 2.8, 2.10,
and 3.7
2.12 OPTIONS INSTALLATION AND CONFIGURATION
See section 7 for installation instructions for all field-installable options. Section 7 also
explains how to set-up any options that have configuration switches, jumpers, potentiometers,
etc. For any options not covered in section 7, refer to custom notes supplied with the RTU-292
or the option, or contact JPS for information.
End of Section 2
JPS Communications, Inc.
2-24