Filter
Top Products
RTU-292 Operations Manual
5.4.7 Elapsed Time Response
%Connection dropped, elapsed time: hh:mm:ss Exx <CR>
Type: Asynchronous.
Response To: Completion of a Radio/Telephone call.
This response indicates that a Radio/Telephone call has been terminated. The response shows the
elapsed time of the call. The time is shown in 24-hour format. Note: the Call Logging Feature must
be enabled before use. See 3.7.12.
Examples:
Status indicating that a radio/telephone call has finished and the call lasted for 1 hour, 12 minutes, 34
seconds.
%Connection dropped, elapsed time: 01:12:34 E0 <CR>
Status indicating that a radio/telephone call has finished and the call lasted for 0 hours, 10 minutes, 25
seconds.
%Connection dropped, elapsed time: 00:10:25 E0 <CR>
5.4.8 Handset Phone Response
%HS_PH <ON|OFF> Exx <CR>
Type: Synchronous.
Response To: Handset Phone Command.
This response indicates the Handset Phone path status.
Examples:
%HS_PH ON E0 <CR> ; Status indicating that the Handset Phone path is enabled.
%HS_PH OFF E0 <CR> ; Status returned indicating that the Handset Phone path is disabled.
5.4.9 Handset Radio Response
%HS_RAD <ON|OFF> Exx <CR>
Type: Synchronous.
Response To: Handset Radio Command.
This response indicates the Handset Radio path status.
Examples:
%HS_RAD ON E0 <CR> ; Status indicating that the Handset Radio path is enabled.
%HS_RAD OFF E0 <CR> ; Status returned indicating that the Handset Radio path is disabled.
JPS Communications, Inc.
5-14