Filter
Top Products
9
48
INSTALLATION AND CONNECTIONS
n Opening the transceiver’s
case
Follow the case and cover opening procedures
shown here when you want to install an optional unit
or adjust an internal unit, etc.
CAUTION: DISCONNECT the DC power cable
from the IC-718 before performing any work on the
transceiver. Otherwise, there is danger of electric
shock and/or equipment damage.
q Remove the 5 screws from the top of the
transceiver and 4 screws from the sides, then lift
up the top cover.
w Remove the 5 screws from the bottom of the
transceiver, then remove the bottom cover.
n Optional bracket and carrying handle
D Mounting bracket
An optional IC-MB5 MOBILE MOUNTING BRACKET is
available to install the radio under a table, on a wall,
in a vehicle, etc.
Select an area to mount the receiver keeping in mind
that the weight of the transceiver is approx. 3.80kg.
D Carrying handle
An optional handle allows you to easily carry and
transport the transceiver.
Attach the MB-23 CARRYING HANDLE with the
supplied rubber feet as shown.