Filter
Top Products
6
MEMORY OPERATION
35
n Memory channels
The transceiver has 101 memory channels. The
memory mode is very useful for quickly changing to
often-used frequencies.
All 101 memory channels are tuneable which means
the programmed frequency can be tuned temporarily
with the tuning dial, etc. in memory mode.
n Memory channel selection
MEMORY
CHANNEL
MEMORY
CHANNEL
NUMBER
CAPABILITY
TRANSFER
TO VFO
OVER-
WRITING
CLEAR
Regular memory
channels
1–99
One frequency and one mode in
each memory channel.
Yes Yes Yes
Scan edge
memory
channels
P1, P2
One frequency and one mode in
each memory channel as scan
edges for programmed scan.
Yes Yes No
D Using the [UP Y] or [Z DN] keys
q Push [V/M] to select memory mode.
• “MEMO” appears.
w Push [CH] to enter memory CH select mode.
• “MEMO” blinks.
e Push [UP Y] or [Z DN] several times to select the
desired memory channel.
• Push and hold [UP Y] or [Z DN] for continuous
selection.
r Push [CH] to exit memory CH select mode.
t To return to VFO mode, push [V/M] again.
D Using the keypad
q Push [V/M] to select memory mode.
• “MEMO” appears.
w Push [CH] to enter memory CH select mode.
• “MEMO” blinks.
e Push [F-INP/ENT], then push the desired memory
channel number using the keypad.
r Push [F-INP/ENT] to select the desired memory
channel.
t Push [CH] to exit memory CH select mode.
V/M
1
UP
DN
or
CH
CH
Y
Z
V/M
1
CH
ENT
F-INP
V/M
1
A=B
2
CH
ENT
F-INP