Filter
Top Products
8
SET MODE
44
• Mode select
This item is available in all modes, and allows you to
simplify operation by inhibiting the selection of unneeded
operating modes during normal operation. For example if
you are operating mobile and only plan on using LSB and
USB modes, use “MODE SELECTION” to inhibit access
to all other modes (CW, RTTY and AM), thereby making
selection of LSB and USB quick and easy.
The default is on for all operating modes. To toggle an
operating mode on or off, push [MODE] one or more times
until the desired mode is displayed. Then rotate the main
dial to set on or off.
• RF/SQL VR
The [RF/SQL] control can be set as the RF/squelch control
or automatic (acts as squelch in AM modes; as RF in SSB/
CW/RTTY modes) or the squelch control. (See p. 20)
The default is rS (RF/squelch).
• Beep level
This item adjusts the confirmation beep level.
The default is 50.
• Band edge beep
A beep sounds when an operating frequency enters
or exits a transmit frequency range. This functions
independent of the confirmation beep setting.
The default is on.
• Side-tone level
This item adjusts the CW side-tone level.
The default is 30.
• Beep
A beep sounds each time a switch is pushed to confirm it.
This function can be turned OFF for silent operation.
The default is on.
n Initial set mode items