Getting Started 21
• To type lowercase letters, press the keys using your thumbs
or fingers.
• To type all uppercase letters, press first, and then press
. To turn off this function, press first, and then press
again.
• To type a single uppercase letter, press and then press
the corresponding key.
• To enter a number or symbol (labeled in red color) or to carry
out a command like scrolling a page, press and then
press the corresponding key.
• To remain in the scrolling mode or to continue entering
numbers or symbols (labeled in red color), press twice
and then press the corresponding keys.
• Press the left or right SOFT KEY to perform the command
shown in the label above the key.
• To enter a symbol, press and then press .
• To move or scroll through one page at a time, press or
.
• To launch Messaging, press , while for Internet Explorer,
press .
LED indicators for
Cap
and Fn keys
1.10 Battery Information
Battery performance depends on many factors, including your wireless service provider’s network
configuration, signal strength, the temperature of the environment in which you operate your phone, the
features and/or settings you select and use, items attached to your phone’s connecting ports, and your voice,
data, and other program usage patterns.
Battery life estimates (approximations):
• Talk time: Up to 5 hours
• Standby time: Up to 200 hours
• Playing WMV: Up to 8 hours
• Playing WMA: Up to 12 hours
WARNING! To reduce risk of fire or burns:
• Do not attempt to open, disassemble, or service the battery pack.
• Do not crush, puncture, short external contacts, or dispose of in fire or water.
• Do not expose to temperatures above 60˚C (140˚F).
• Replace only with the battery pack designated for this product.
• Recycle or dispose of used battery as stipulated by local regulation.
To check the battery power
• On the Home screen, click Start > Settings > Power Management.
To optimize the power performance
• On the Home screen, click Start > Settings >
Power Management, and adjust the backlight,
display, and light sensor settings.