Filter
Top Products
Page 196 Advanced HotSync® Operations
8. Close the HotSync Software Setup dialog box.
Preparing your communicator
There are a few steps you must perform to prepare your communicator for a wireless HotSync
operation.
To prepare your communicator for a wireless HotSync operation:
1. Press Option and then press Menu to access the Applications Launcher.
2. Tap the HotSync icon .
3. Tap Modem.
4. Tap the pick list below the HotSync icon and select Wireless Modem.
5. Tap the Enter Phone # field.
Modem
Identifies the modem type or manufacturer. Refer to your modem
manual or face plate for its type or settings. If you’re not sure of your
modem type or your modem doesn’t match any that appear in the list,
select Hayes Basic. If you chose Custom from the Modem pop-up
menu, a Custom field appears. Use this field to enter a custom modem
setup string.
Port
Identifies the port for your computer modem.
Speaker
Turns the computer modem speaker on or off. If you’re having trouble
connecting, turn on the modem speaker to make sure that it is
responding to incoming calls.