Filter
Top Products
5 - 20 Dolphin® 9500/9550 Mobile Computer User’s Guide
Port Settings Advanced settings opens to this tab window. On it, enter the parameters for the port the terminal is
using.
TCP/IP settings Tap on this tab to configure TCP/IP settings. Server-assigned IP addresses use Dynamic Host
Configuration Protocol (DHCP).
Connection preferences
Data Bits • Can be set between 4 and 8
Parity
• Can be set to None, Odd, Even,
Mark, or Space
Stop Bits • Can be set to 1, 1.5, or 2
Flow Control
• Can be set to Software,
Hardware, or None
Terminal settings
Use terminal before connecting
Use terminal after connecting
Enter dialing commands manually
Tap OK to save settings.
You can
• Use the server-assigned IP address
(recommended) or enter a specific IP address in
the field provided
•Use Slip
• Use software compression
• Use IP header compression
Tap OK to save settings.