Filter
Top Products
Dolphin® 9500/9550 Mobile Computer User’s Guide 12 - 3
Power Supply
The ChargeBase includes a power supply that contains a power adapter to ensure the proper voltage. The power adapter is
plugged into standard AC/DC outlets.
Supplying Power to the ChargeBase
Using a non-HHP power adapter voids your warranty and could result in serious damage to the circuitry of the Dolphin
ChargeBase.
1. Be sure the power switch on the power adapter is in the OFF position.
2. Plug the power cord into the power adapter.
3. Plug the power connector cable into the power connector on the back panel of the ChargeBase.
4. Plug the power cord into a standard wall outlet.
5. On the power adapter, turn the power switch to the ON position. The LEDs illuminate as the ChargeBase powers up.
6. The ChargeBase is ready to begin charging terminals.
Power Cord
ON/OFF
Switch
ON Position
Power Adapter
Power
Connector
Cable
!