Filter
Top Products
Accessing the Management Interfaces (FastHub 400M Models)
FastHub 400 10/100 Series Installation and Configuration Guide
2-22
Figure 2-10 Home Page
Note You can bookmark the hub IP address to retrieve the hub manager for later use. If
you are using Communicator, choose the Communicator menu option, and select
Bookmarks > Add Bookmark. If you are using Internet Explorer, choose the Favorites
menu option, and select Add to Favorites. Do not use the right mouse button to bookmark
the hub IP address; doing so only saves the specific frame (image) of the hub manager page.
Click Help for
procedures and
detailed field
descriptions.
Click Revert
to discard
unapplied
changes on
a page.
Click Apply after
making changes
on a page.
15529
Click the Mode
button to change
the mode that
the LEDs display
for the fixed
10/100 ports.
HOME PORT GROUP IP SNMP CDP SYSTEM
Click these topics to move from page
to page. On Netscape Communicator
only, when the cursor is above a topic,
a pop-up briefly describes the options
on that particular page.
Click a port to display its
settings, status, and statistics.
Click to display the settings, status, and
statistics of an installed 10BaseT/100BaseTX
or 100BaseFX switched uplink module.
Shows when another hub is connected to a
stacking connector on the hub rear panel.