Filter
Top Products
Installing and Starting Up the Hub 2-11
Attaching the Cable Guide to the Bracket
Attaching the Cable Guide to the Bracket
Attaching the cable guide and securing the cables in the cable guide prevent the cables from
obscuring the hub and other devices in the rack. If the hub is in a 19- or 24-inch rack, you
can attach the cable guide to the left or right rack-mount bracket with the black screw, as
shown in Figure 2-5.
Figure 2-5 Attaching a Cable Guide
After the hub is in the rack, connect one end of the AC power cord to the AC power
connector on the hub and the other end of the cord to a power outlet. If your configuration
has a Cisco RPS, see the RPS documentation. After power is connected, the hub starts the
series of self-tests described in the “Powering Up the Hub and Running POST” section on
page 2-6.
H10560
RPS
MODE
1x 2x 3x 4x 5x 6x 7x 8x 9x 10x 11x 12x 13x 14x 15x 16x 17x 18x 19x 20x 21x 22x 23x 24x
SERIES
Ax Bx
Black Philips machine screw